3x GTX 1060 6GB MSI Gaming X
I was running a heavy workload on the cards for about 4 hours. (Mining using Claymore miner - no hate, lol.)
I woke up and 2 of the cards were still running like normal, however the 3rd card was showing as '0' in everything in Afterburner. 0 Voltage, 0 MHz etc.
Furthermore, the fans on this card aren't running, but it's light is on.
I have restarted PC and i get same thing and nothing changes.
Have I killed my card? If not, what can I do to resolve it?
(I last used all the cards together in sync in MSI Afterburner @ 75% TDP, +100 Core Clock, +650 Memory clock. The temperature was only at 55-60°c.)
boot
boot a second time
open afterburner
lower tdp to 70%
lower core to 75
lower memory to 500
fire up claymore see if it runs if it does your clocks of
tdp 75%
core 100
memory 650
are too high.
If it does not run with lower clocks
power off.
remove 2 cards
run the one card on the mobo slot not a riser
use the low clocks I gave you
if it runs power off test the next card only run 1 card
if it runs power off test the last card only run 1 card
if all cards run 1 at a time then check the risers smell them for burnt smell.
Check the cables leading to the risers.
How do you power the cables?
sata 1 maybe 2 risers on 1 cable
molex 1 maybe 2 risers on 1 cable
pcie 2 on a two plug cable