I'm having a weird issue. Claymore just waits after it starts and says OpenCL initializing... then it lists the cards and just waits.
I used to be able to fix this by restarting claymore or restarting the computer but it's not helping anymore.. it just waits every time and won't mine.. Any ideas?
Sounds like it could be hanging from too high of an overclock. Try backing down the core clock by 10 MHz and the memory clock by 50 MHz and see if it helps.
Thanks. I narrowed it down to 1 card but that card messes it up even at stock clocks/volts.
I figured it out by trying just the first card using -di 0 and it actually loaded correctly and mined. Then tried -di 01 and it didn't work.. then I tried all but that 1.. -di 02345 and it worked! so it's 1 card in particular giving me and issue.. it's actually the same card that kept hanging every few days stopping the rig from mining. I'll have to check the riser and maybe try that specific card in another rig to see what's up
I've been having a similar issue - everything fine for weeks, then that same process., even on stock clocks. Did you work out if it was the card or the riser? (obvs I'm hoping for a riser swap fix ;-)