1060 3g hyrix, 80% TDP, core -200, men+600,19.5mh/s, so bad. claymore 9.7
if i set mem +650,it crashs.
using claymore this happen
using ethminer 1060 mod will give u more speed
mine is 65% tdp
+100 core +880 memory getting 25mh on ethminer!!!
Hello everyone,
I'm super new to this mining thing so please bare with my stupidity.
I'm running:
6x evga 1060 6gb ssc on simple mining os (Have 8 cards total but waiting on Dual PSU Adapter)
Getting 25-25.15 MH/s per card
Claymore-eth-v9.7
Overclocking settings:
Core -100
Memory +1900 (which would be +950 on afterburner)
Power limit 73
Target temp 80
Fan speed 50%
Output is 73w per card and 515w for whole rig
All cards are ranging from 35C-43C
Rig:
Z270-A
Pentium G4400
G.Skill TridentZ 8gb ram
EVGA 1000w GQ
Am I doing this right or is this overclock killing my GPU's? Any advice for this newbie would help. Thank you.
The OC settings you stated is fair enough to run it stable. And if it crashes, it would be because of less power for such OC. So juice it up a bit more and see if that works. However, nobody can know if you can get 25mh/s out of that. you need to play with it and find the acceptable settings yourself.