I have a tb250-btc pro motherboard that supports 12 cards and 12 1060s hooked up, but whenever I boot up I get scrolling PCIe Bus errors. The bios is set to mining mode - above 6g and SMOS supports 15 cards so theoretically there shouldn't be an issue. I know one guy here got the same board up and running with 12, but I can't seem to get over 6 without these issues. I've talked to the dev and he's working on it, but I want to ask if anyone has had and overcome this issue in the meantime.
Bootup with PCI-16x slot
Goto BIOS
Disable Sound
Power ON after power loss
On board graphics - Enabled, select IGFX
Mining Mode - Above 6G
Save reboot
plugin to onboard graphics
*** set all PCI speed to "Gen 2" if that helps
Thanks for the reply! Unfortunately this didn't help. We're still getting scrolling errors that say:
PCIe Bus Error: Severity=Corrected, type=Physical Layer, id=00db(Receiver ID)
device [8086:aZee] error status/mask=00000001/00002000
Any ideas?
Disable aspm via bios and if that doesn't help smos dev must add some kernel boot options to /etc/default/grub