Hey guys I am running v0013 and it was running smoothly for 5 weeks. Now every few days the terminal locks up with this error :
Error message : NVML: cannot get current temperature, error 15
Has anyone here seen the issue before or found a way to resolve?
My rig uses 9x 1070s OC settings are cc100 / mem900 which was stable for 3 weeks. Recently I power limited to 140 ( I dual mine ) but I seem to get the error whether power limit is on or off.
Since the system freezes I cant remote in to reset it. I might buy a wifi power point so I can reaet it today but would rather a cure
I scoured the forums and some people reckon turning off WD worked in windows but cant seem to replicate the fix in Linux.
Here was one solution :
"Problem solved : -write "-wd 0" in claymore start.bat -in windows power management high, pci off"
Error message : NVML: cannot get current temperature, error 15
Has anyone here seen the issue before or found a way to resolve?
My rig uses 9x 1070s OC settings are cc100 / mem900 which was stable for 3 weeks. Recently I power limited to 140 ( I dual mine ) but I seem to get the error whether power limit is on or off.
Since the system freezes I cant remote in to reset it. I might buy a wifi power point so I can reaet it today but would rather a cure
I scoured the forums and some people reckon turning off WD worked in windows but cant seem to replicate the fix in Linux.
Here was one solution :
"Problem solved : -write "-wd 0" in claymore start.bat -in windows power management high, pci off"
If you only started having this problem after increasing your powerlimit: your risers might not be quite able to handle the higher powerlimit.
What kind of risers are you using, and how are you powering them?
If you look in the system log after a crash:
top left type system, click System Log
it should tell you what likely caused the trash.
If you are using claymore: I highly recommend updating to v0018 as it has the 9.7 version of claymore which has significantly higher hashrates.