Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s
I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).
My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%
This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.
Hope it helps
Your 25?4 mh/s is very high for a simple GTX 1060 6 GB.
It is approx what I have with my GTX 1070...
What do you chooe 90% for the fan : it is very high. Because there is only one fan in your 1060 ? With 2 fans, you would choose the same setting, 90 % ?
Yes 90% fan speed is due to the single fan. I have another AMD rig with dual fans on the cards, and these run at 55% speed, the more fans the less fan speed required, and the less noise you will have.
1070s should reach 29mh/s if I remember correctly.