Hi fullzero,
thank you for keeping this project alive and the constant updates.
I've been running 017 version on z270-hd3p gigabyte motherboard + 3 x 1080TI and a 1070 for almost 2 weeks now with no issues.
meanwhile does anyone have the issue with 018 version not working at all? ewbf does not even start. Most settings have been the same as from the onebash file in 017. Turned off most of the new additional features like watchdog and auto temp.
I've tried booting from an ssd as well as a 32gb sandisk ultra flair thumbdrive; I keep getting the error [Screen is terminating] at the end.
I understand the issue is most likely a configuration somewhere gone wrong, therefore it terminated before even trying to load ewbf miner, but was there such a drastic change from 017 to 018 that I missed out?
Would really like to find out if anyone faced a similar issue, so I iron it out and run ver 018.
Thanks!
I ran into the same problem after using the most current files. No idea what's causing it. I've disabled autotemp, watchdog, set to LOCAL, tried mizer on and off, etc. but nothing fixed it. I see EWBF load for 1/2 a second then that 'screen is terminating' message pops up. I think it might be related to watchdog, even though its disabled in the 1bash file, but I can't figure out how exactly.
I made an updated 1bash which should resolve these powerlimit / remote issues.
With the powerlimits the autotemp was not reinitializing unless explicitly killed or the rig was logged out or rebooted. This had the effect of not allowing changes to the individual powerlimits until such killing or logout / reboot.
With the remote issues; I was querying the existing processes incorrectly when in REMOTE causing duplicate watchdogs to be created.
I altered upPASTE to check for a 1bash update on launch.
I added logic based on Avarets experience with P106-100 (I don't have any of these so I am going on your report Avarets; let me know if these changes work)
Please let me know if there are any issues with these updates.