Does anyone know if there is a way to set temperature target for card instead of powerlimit? I have couple gtx 1060 cards that won't go below 97W when running in nvOC, which is 80% power limit, same thing is in windows no matter which tool I use, but when I use power target in windows and set it to ie.65C the cards power usage goes down to 80W. Unfortunately I wasn't able to find if there is a way to control temp target in linux. Any help would be greatly appreciated.
If you use v0018 and download the newest 1bash and files / copy them to the home directory replacing the ones that are there / configure the 1bash:
setting:
Maxximus007_AUTO_TEMPERATURE_CONTROL="YES"
and each individual powerlimit and temperature limit + control settings:
INDIVIDUAL_POWERLIMIT_0=75
INDIVIDUAL_POWERLIMIT_1=75
INDIVIDUAL_POWERLIMIT_2=75
INDIVIDUAL_POWERLIMIT_3=75
INDIVIDUAL_POWERLIMIT_4=75
INDIVIDUAL_POWERLIMIT_5=75
INDIVIDUAL_POWERLIMIT_6=75
INDIVIDUAL_POWERLIMIT_7=75
INDIVIDUAL_POWERLIMIT_8=75
INDIVIDUAL_POWERLIMIT_9=75
INDIVIDUAL_POWERLIMIT_10=75
INDIVIDUAL_POWERLIMIT_11=75
INDIVIDUAL_POWERLIMIT_12=75
INDIVIDUAL_POWERLIMIT_13=75
# Set the target temperature per card.
# Don't set it too low, if the temperature can't be reached with fan adjustments it will decrease power.
# Recommended ranges: 55 - 70 degrees Celsius
# If actual temp is above the target temp this script will up the fan speed
TARGET_TEMP_0=70
TARGET_TEMP_1=70
TARGET_TEMP_2=70
TARGET_TEMP_3=70
TARGET_TEMP_4=70
TARGET_TEMP_5=70
TARGET_TEMP_6=70
TARGET_TEMP_7=70
TARGET_TEMP_8=70
TARGET_TEMP_9=70
TARGET_TEMP_10=70
TARGET_TEMP_11=70
TARGET_TEMP_12=70
TARGET_TEMP_13=70
# If actual temp is above value set above and fan speed is 100,
# the script will lower the power limit
# SET INDIVIDUAL POWERLIMITS ABOVE
# Adjustment size (FAN in percent, POWER in Watts)
__FAN_ADJUST=5
POWER_ADJUST=5
# Difference in actual temperature allowed before action.
#Works only if current is BELOW target temp
ALLOWED_TEMP_DIFF=3
# Restore original power limit if fan speed is lower than this percentage
RESTORE_POWER_LIMIT=90
# lowest fan speed that will be used
MINIMAL_FAN_SPEED=50