Good afternoon!
===
I'll start with the configuration of my equipment:
GPU - 13 Colorful P106-100 Mining (without video outputs) Edition or 12 + 1 MSI 1060/6 (with video output)
Motherboard H110 Pro BTC
===
Downloaded and installed nvoc 18 version.
Starting with the first run, the system immediately began to issue an error and go into reboot. (Screenshot attached)
http://prntscr.com/fzo8uv http://prntscr.com/fzobubIf you quickly close this window with an error and try to start the miner - the system starts and mining.
But, the system does not respond to overclocking. Increasing the memory, setting the speed of the coolers, powerlimit - nothing is applied and the system can only run in the stock.
It did not work out, I tried to connect via integrated video graphics, also through a card with a video output. I suspect this is because of the error that pops up at the very beginning, related to xorg.
One error message also appears on one MSI 1060/6 card.
I tried to run the data on the motherboard H81 Pro BTC + net install Ubuntu + version of the drivers Nvidia 384.47 and everything was fine.
Tell me how to solve this problem?
For earlier I express my gratitude!
I ask for prognosis for the possibly incorrect text, tk. I used an interpreter.
nvOC doesn't support integrated graphics. If you connect a monitor to the integrated graphics you will enter an infinite loop where the system xorg get corrupted then 1bash restores the xorg and reboots.
If you have connected a monitor to integrated graphics previously; after switching to using the primary GPU (the one connected to the 16x slot) you will need to allow the system to reboot once, then on the second boot after changing it should work.