Hi

I'm new here and want to thank you for your great miner at first.

But unfortunately a have a Problem with the monitor tool.

I have two nvidia rigs running - one with Win10Pro and one with nvOC Ubuntu based OS, both using Claymore v9.7 and 384.xx drivers
The Linux one runs fine and monitoring as well - no problems here.

The miner on the windows rig runs very good as well, but here the monitoring dosen't work more than 1.5 hours.
When I restart the system everything works as it should. Most of the time some fan speeds are shown as 0% despite them running, but thats no big deal to me.
But after about 1.5 hours (sometimes 1, sometimes 2) the monitor loses connection to this rig. The rig still is connected and mining, can be pinged...all good.
I run the monitor on the rig itself - but even if a use a different PC in the same network it makes no difference.

Both rigs have a fixed IP by the router, I tried with windows firewall completely turned off but no change.

Before I was using v9.5 and only had that windows rig and monitoring worked without problems for days. The problems came with the update to v9.7.
I did not use v9.6. And using the moitor from v9.5 shows the same behavior.

So to me it looks like something happens that claymore stops reporting. But the only error I found in the log is the fanspeed error 999.


And a question about the use of the monitor tool.
If I use it on rig1 and monitor rig1 and rig2. If rig2 fails somehow the restart.bat I set for that case is executed on rig1 which runs the monitor.
So even if rig1 runs like it should it is restarted because of rig2 failure.
Maybe I got something wrong...but maybe room for improvement.


By the way - anyone tested the new 393.39 drivers already? Worth to install it?