Hi, I having trouble getting my miner(sig-miner) setup to run right. Windows 10. have 5x R9 390's only getting 2mh/s on each.
Bat file:
setx GPU_MAX_ALLOC_PERCENT 100
sgminer -k skunkhash -o stratum+tcp://sigt.suprnova.cc:7106 -u XXXXXXXX -p XXXXXXXXXX -I 20
Any help would be appreciated..... Also does it matter what drivers Im using. (15.12 Crimson). I did update drivers but same issue...
This is suited more for Nvidia GPU's rather than AMD. It may be that your R 390x's are just too outdated (Please correct me if I am wrong).
People have also reported that their RX470/480 is only giving them 5 -10mh per card.
Might be worth sticking to Ether or something else that uses suitable algo.
No need to overclock the memory, If you'll downcloack it to 1400-1500, you'll get the same result with less power consumption
HI guys
xfx 480 8gb Core clock:1320 Memory: 2200 18.03Mh/s
msi 480 8gb Core clock:1266 Memory: 2150 17.18Mh/s
I 20
BIOS moddified for ETH
My R9 390 and R9 390x gives me about 9Mh/s each so I left them to eth
4 x ASUS OC top ed 580 8GB Core: 1411 Mem: 2090 19.8Mh/s
2 x MSI Aorus 580 8GB Core: 1350 Mem: 2150 18.8Mh/s
I 20 - Any higher is unstable
BIOS modded for ETH @ 28.6Mh/s
Total hash 6cards 116Mh/s
ASUS OC Top ed is by far the best 580 I've used (compared to MSI & Gigabyte) and Currently I mine about 20-24 coins per hour which @ $0.02 per coin is about $10.5 p.d. compared to 162Mh/s with ETH and mining approx $9 p.d.
I'm pretty sure R9 XXX cards are not supported on this miner as they are "too old" for this new algo.