can we do skunk on this? on zpool
do I have to add the software to mine or is the option added.
I been tied up for days fixing my btc and my bcc. the free money was nice.
I now would like to do some skunk on my new build here.
Yes you can mate, just browse around couple of pages back, there are instructions with comments (I could've quoted it but using mobile now sorry)
EDIT:
Here you go mate, tried my best, hope it helps...
Hi guys,
i do a little "how to" if some people want to mine SIGT / skunk algo.
First of all i use Palginmodccminer ( the SP_MOD is faster but u have to pay )
FIRST STEP GET THE CLIENT
### Be in home dir ###
SECOND STEP EDIT BASH
### Open 1bash
### Add SIGT and SIGT_BTC specs ( u have to modify SIGT_WORKER and SIGT_ADDRESS by your seting )
### If u use SIGT_BTC, be sure to get correct ( your BTC adress )
### Add miner specs to the end of ur file between the two last "fi" ( ensure ur worker have x password on suprnova pool, or modify the "-p x" by "-p YourPassword" in the SIGT section )
THIRD STEP OC SETTING ( ASUS 1070 GTX 8OG / prolly ok for most 1070 gtx )
First of all this algo, gona get a lot of heat from your card, he use core, not memory.
CoreClock : 120
MemClock : -2000
PowerLimit at default : 150W
Temp Target 70°
Fan between 95% - 75% ( I use watchdog )
This fine tunning work like a charm 213mh/s on suprnova, 211mh/s on zpool
U have to disable
Or your RIG gona get restart for nothing, i dont modify IAmNotAJeep_and_Maxximus007_WATCHDOG, if i do prolly i can get him work with this setup but more simple to stop him for this coin
Et voila
i do a little "how to" if some people want to mine SIGT / skunk algo.
First of all i use Palginmodccminer ( the SP_MOD is faster but u have to pay )
FIRST STEP GET THE CLIENT
### Be in home dir ###
Quote
cd /home/m1/
### Create a directory for your new miner ###Quote
mkdir PMccminer
### Go in new dir ###Quote
cd PMccminer/
### Download miner client ### Quote
### Extract the file ###Quote
tar -zxvf palginmod_1.1_Ubuntu.tar.gz
### Delete start.sh ###Quote
rm start.sh
### Back to home dir ###Quote
cd /home/m1/
SECOND STEP EDIT BASH
### Open 1bash
Quote
nano 1bash
### Add SIGT and SIGT_BTC to the coin selection Quote
# CHOOSE COIN FROM:
# DMD GRS ZPOOL_LYRA2V2 ZPOOL_BLAKE2S
# ZEC ZCOIN HUSH ZEN ZCL SIGT SIGT_BTC
# NICE_ETHASH ETH MUSIC ETC EXP DCR PASC
# MONA VTC DGB SIA FTC LBC
# DUAL_ETC_DCR DUAL_ETC_PASC DUAL_ETC_LBC DUAL_ETC_SC
# DUAL_EXP_DCR DUAL_EXP_PASC DUAL_EXP_LBC DUAL_EXP_SC
# DUAL_ETH_DCR DUAL_ETH_PASC DUAL_ETH_LBC DUAL_ETH_SC
# DUAL_MUSIC_DCR DUAL_MUSIC_PASC DUAL_MUSIC_LBC DUAL_MUSIC_SC
# DMD GRS ZPOOL_LYRA2V2 ZPOOL_BLAKE2S
# ZEC ZCOIN HUSH ZEN ZCL SIGT SIGT_BTC
# NICE_ETHASH ETH MUSIC ETC EXP DCR PASC
# MONA VTC DGB SIA FTC LBC
# DUAL_ETC_DCR DUAL_ETC_PASC DUAL_ETC_LBC DUAL_ETC_SC
# DUAL_EXP_DCR DUAL_EXP_PASC DUAL_EXP_LBC DUAL_EXP_SC
# DUAL_ETH_DCR DUAL_ETH_PASC DUAL_ETH_LBC DUAL_ETH_SC
# DUAL_MUSIC_DCR DUAL_MUSIC_PASC DUAL_MUSIC_LBC DUAL_MUSIC_SC
### Add SIGT and SIGT_BTC specs ( u have to modify SIGT_WORKER and SIGT_ADDRESS by your seting )
Quote
SIGT_WORKER="SIGT"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"
###SIGT_BTC use BTC adresses###
SIGT_BTC_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"
###SIGT_BTC use BTC adresses###
SIGT_BTC_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"
### If u use SIGT_BTC, be sure to get correct ( your BTC adress )
Quote
BTC_ADDRESS="3JJaMUVBJp55BNsGvYynaJhDXRyUf95hyG"
### Add miner specs to the end of ur file between the two last "fi" ( ensure ur worker have x password on suprnova pool, or modify the "-p x" by "-p YourPassword" in the SIGT section )
Quote
if [ $COIN == "SIGT_BTC" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$BTC_ADDRESS"
screen -dmS miner $HCD -a skunk -o $SIGT_BTC_POOL -u $ADDR -p c=SIGT
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
if [ $COIN == "SIGT" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$SIGT_ADDRESS.$SIGT_WORKER"
screen -dmS miner $HCD -a skunk -o $SIGT_POOL -u $ADDR -p x
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$BTC_ADDRESS"
screen -dmS miner $HCD -a skunk -o $SIGT_BTC_POOL -u $ADDR -p c=SIGT
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
if [ $COIN == "SIGT" ]
then
HCD='/home/m1/PMccminer/ccminer'
ADDR="$SIGT_ADDRESS.$SIGT_WORKER"
screen -dmS miner $HCD -a skunk -o $SIGT_POOL -u $ADDR -p x
if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi
BITCOIN="theGROUND"
while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi
THIRD STEP OC SETTING ( ASUS 1070 GTX 8OG / prolly ok for most 1070 gtx )
First of all this algo, gona get a lot of heat from your card, he use core, not memory.
CoreClock : 120
MemClock : -2000
PowerLimit at default : 150W
Temp Target 70°
Fan between 95% - 75% ( I use watchdog )
This fine tunning work like a charm 213mh/s on suprnova, 211mh/s on zpool
U have to disable
Quote
IAmNotAJeep_and_Maxximus007_WATCHDOG="NO"
Or your RIG gona get restart for nothing, i dont modify IAmNotAJeep_and_Maxximus007_WATCHDOG, if i do prolly i can get him work with this setup but more simple to stop him for this coin
Et voila
thanks for the walkthrough. there is a few things that i think are backwards on your instructions. on my nvoc the directories are /home/m1/ and you have /m1/home/ in your instructions.
also, with the settings i am entering into the fields for the suprnova pool info, i dont know if they are right or what is going on...i am getting a error when i run the terminal "stratum authentication failed" then trying again in 30 seconds. your settings show:
SIGT_WORKER="SIGT"
SIGT_ADDRESS="Bibi187"
SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"
in suprnova, my worker is "firstname.systemnumber" example "lovecoin.sys1" - so would i make my settings look like SIGT_WORKER="lovecoin.sys1" ? also what am i editing to sigt_address?
Nice point about the path, the true one is /home/m1, i edit the post
SIGT_WORKER="sys1"
SIGT_ADDRESS="lovecoin"
Will do the job
