Hi guys, if posted prior my apologies as I tried to search this thread and the global threads.
My question is in regards to 'Maximus007_Auto_Temperature_control'
When I have it on it doesnt matter what I set the 'target_temp' for each card at it seems to like running the cards at 70 to 80 degrees and will up and down scale the fans to keep them there. Fans are at 30 - 35%.
I prefer a temp of 55 to 60.
Then I thought I would turn it off but even if I set manual fan to yes and the auto temp to 'no' my fan speed of 65% is not reflected so I think the script runs regardless of what you put in 1bash.
Anyone had this issue and either (a) found a way to make it respect the selected temperature or (b) disable it and allow for manual fans?
Many thanks!
My question is in regards to 'Maximus007_Auto_Temperature_control'
When I have it on it doesnt matter what I set the 'target_temp' for each card at it seems to like running the cards at 70 to 80 degrees and will up and down scale the fans to keep them there. Fans are at 30 - 35%.
I prefer a temp of 55 to 60.
Then I thought I would turn it off but even if I set manual fan to yes and the auto temp to 'no' my fan speed of 65% is not reflected so I think the script runs regardless of what you put in 1bash.
Anyone had this issue and either (a) found a way to make it respect the selected temperature or (b) disable it and allow for manual fans?
Many thanks!
change:
Code:
TARGET_TEMP_0=60
TARGET_TEMP_1=60
TARGET_TEMP_2=60
TARGET_TEMP_3=60
TARGET_TEMP_4=60
TARGET_TEMP_5=60
TARGET_TEMP_6=60
TARGET_TEMP_7=60
TARGET_TEMP_8=60
TARGET_TEMP_9=60
TARGET_TEMP_10=60
TARGET_TEMP_11=60
TARGET_TEMP_12=60
TARGET_TEMP_13=60
TARGET_TEMP_1=60
TARGET_TEMP_2=60
TARGET_TEMP_3=60
TARGET_TEMP_4=60
TARGET_TEMP_5=60
TARGET_TEMP_6=60
TARGET_TEMP_7=60
TARGET_TEMP_8=60
TARGET_TEMP_9=60
TARGET_TEMP_10=60
TARGET_TEMP_11=60
TARGET_TEMP_12=60
TARGET_TEMP_13=60
for b see:
https://bitcointalk.org/index.php?topic=1854250.msg20730240#msg20730240
Hi Fullzero,
With a fresh install of NvOC , changing target temps doesnt do anything on my rig. The fans do move up and down but they dont maintain target temp.
For example I set target temp as per your note to 60 and the cards run at 80. The fans go up and down on each card to maintain 80. The expected result is that they go faster to say 55% so the card runs at 60.
If I follow the steps in (b) this doesnt do anything different.
I am using v17 , was this an issue in 17? Or could it be my cards causing the issue
I am in Australia and we have celcius as our default temperature and you guys use farenheit could that be an issue somewhere?
In version v15 if I set manual fans to 70% they ran at 70% - for me in this version they seem to do their own thing
