Re: Signatum (skunk) ccminer-krnlx 30+mh 1070, 52.5+ mh 1080ti [FREE,OPENSOURCE]
Simple calculation:
1. Start mining with krnlx or sp mod and note the time and number of SIGT.
2. After 6 hours (the longer the better) come back and see how many SIGT have been mined.
3. Repeat 1 and 2 with other miner.
4. Compare # of Sigt mined; the higher # is the better miner.
Ive been tracking mine for days now. Im pretty confident krnlx with suprnova sucks balls. At least for my setup. (Win 7 64 bit, 1060x3, 1070 x4)
Just because it shines doesnt mean its gold as the saying goes....
1. Start mining with krnlx or sp mod and note the time and number of SIGT.
2. After 6 hours (the longer the better) come back and see how many SIGT have been mined.
3. Repeat 1 and 2 with other miner.
4. Compare # of Sigt mined; the higher # is the better miner.
Ive been tracking mine for days now. Im pretty confident krnlx with suprnova sucks balls. At least for my setup. (Win 7 64 bit, 1060x3, 1070 x4)
Just because it shines doesnt mean its gold as the saying goes....
Agreed. I have been using spmod for the past few days. I switched to krnlx overnight because the reported hashrate was a little higher. Imagine my surprise when I got up in the morning and saw that suprnova reported my hashrate at about 30% of what the miner showed. The earned coins also reflected this. Switched back to spmod which fixed everything.
a lot of newbee accounts praising SPmod like they know everything.. hmm... What to make of it. Unless you test both miners on the same pool for at least a day simultaneously there is no way to compare results
I'm not praising SPmod, I'm just stating the facts. I've mined a lot of different algos with a lot of different miners through Suprnova. My reported hashrate and what suprnova reports are always within 20% of each other. In this case krnlx reports I'm getting 116 mh/s. Suprnova reports 33. That's quite a large difference.
I do have the tools and two exact the same mining rigs (both 6x1070) to do a comparison between skunk and the spmod miner.
What I will do:
- tune both rigs so they have exact the same hashrate using skunk ccminer (done already)
- connect them to the same pool and set the share difficulty static at 1.0 so I get enough shares (this helps a bit to filter the "luck" factor on a longer run)
- Count the number of shares on both rigs + monitor the hashrate for let's say 24 hours.
I can do this with the leaked spmod 5 , since I don't have spmod 6.
If one wants me to do the comparison with spmod 6, please PM me a link.
edit: as we speak I run this comparison with spmod 5 now vs the last compiled skunk miner
edit 2: way to early to draw conclusions as it's only running for half an hour, but this is the result so far
ooh before asking why my hashrate is so low: my cards run heavily undervolted / volt modded. They draw only 75 watt each from the wall at these hashrates. This keeps my room a bit cool and saves me some power costs.