Hey guys,
Does anyone know how to set up the autostart 1bash , temp control and watchdog bash files when you use SSH ? Is it possible to set up in a way so when I turn my rig on using SSH remote control , the 1bash will autostart and mining goes without me using ' bash /home/m1/1bash ' ?
I've tried to add these processes into the autostart but with no luck, I always have to open 1bash myself through the console.
Thanks for you help.
By the way, since in my set up I do not have any normal cards with video output(only using P106-100 cards) , I had problems with integrated graphics processor , when I installed the fresh OS on the rig without attached monitor to mobo and used SSH(for editing 1bash , etc.) it seemed to me that my usual "NVLM error 15 " or just freezing of the system doesn't come up as often as when I was using a monitor and local controling of the rig. I think this is because now in xorg files there's no mention of my "intel graphics". So everyone who has the same problem try to install the OS this way and remote control through SSH. I'm still to try and work around the overclocking these cards , hopefully fullzero will connect sometime soon and help me with that.
1bash is autostarted by default.
By the way, it's a good idea to buy a gtx1060 or 1050ti as primary GPU.
I think it's not the case here since the mining process doesn't start by itself or any other bash files like temp control and Watchdog,also checked through 'nvidia-smi' and 'screen -r miner' , I have to use "bash /home/m1/1bash" in my SSH terminal to start mining.
I was thinking about that but since it's not as easy for me to obtain new hardware quickly I have to adjust to what I have at the moment. I will probably end up obtaining one 1050ti card just to be safe since I still have one slot free anyway.
Did you have any luck with OC in your set up with 1 normal card and 12 P106-100 ?