P106-100 BOUNTY
The person who will be able to unlock the overclock of my 13x P106 Rig (on the ASRock H110 BTC) with nvOC will get
1 ETH
I only got pure P106-rigs and no non-mining cards mixtures.
PM me and I will give you access to one of my Rigs.
Thanks!
I'm ready to make a
donation too, if the issue with
P106 cards is finally solved, but it's been so long already ...
Download the pure P106-100 1bash for headless SSH operation from the link on the OP; replace the 1 bash on your rig with it.
Add your pool / addresses / workername to the 1bash.
Note: for this version don't use:
Maxximus007_AUTO_TEMPERATURE_CONTROL
or
IAmNotAJeep_and_Maxximus007_WATCHDOG
ensure they are both set to "NO"
Run the mining process; it should not OC at this time. This is expected; it will alter the xorg.conf as needed.
Note the Rig IP; write it down.
If you are not already running fully headless; ensure that you reboot: disconnecting any monitor from integrated graphics on the mobo before the rig reboots.
With your rig IP ssh into the rig after it boots ( see guide on the OP for more information on how to do this. If from a linux system use the cmd from terminal:
ssh m1@your_rig_ip_here
you will be prompted
enter:
yes
the password is:
miner1
once you are logged in via SSH; enter:
screen -ls
if there is already a screen named miner use the cmd:
screen -r miner
to reconnect to the mining process and ignore the rest of this guide
if there is not; enter the cmd:
bash 1bash
to launch the mining process
once you see the message:
process in screen miner; attach with: screen -r miner
hit
ctrl + c
then enter:
screen -r miner
If you have problems with this; let me know. I can't test this directly as I don't have these GPUs; but this should work unless I made a typo in the 1bash.
Also; you can edit the 1bash via SSH with the cmd:
nano 1bash
note this is a visual editor; again see the SSH guide for more info on nano.