hi everybody
changed my mind to mine dual now instead of eth solo, and I am dissapointed with my results
I only get 28 mh/s on every gtx 1070 and 280 mh/s on decred but I saw people with similar oc: 72% power limit, -60 core and +550 memory clock, obtaining around 700 mh/s on decred
eth only I usually get 30 mh/s
otherway, on siacoin I get 27 mhs and around 500 mhs
so what is the problem here?
any help?
I`ve just tried to lower my power limit from 85% to 72% and lowering my core to -60 (was +100) on gtx1070 and show maybe -.2 mhs on Eth speed. Mining eth+Sia(Claymore 9.7) gives me depending on the card memory (Mem clock ranging in AfterBurner from 4400 mhz(Hynix) - 4600 mhz(Samsung))from 31.5 to 32.5 mhs and SIA=400 mhs. So the first thing to improve is eth/sia ratio and it`s done with the -dcri value in Claymore to mine less shitty SIA vs ETH. I`m using: -dcri 38. You`r mining Sia at 500 and I mine that at 400 mhs. Could use Claymore keyboard commands +/- to fine tune the -dcri and then add to ur command line the best value. Suspect that u have the same problem with decred (dcri). Ur mem clock might be low, depending on the mem default settings ur card have +550 mean nothing here, all my card are at more than +550, check ur memory brand and try to adjust according to that, for ex. my best gtx1070 with Samsung mem = +800 ultra stable. Good luck!