Well I had 1.4 and 1.48 in the same folder compressed so I decompressed 1.48 to make sure that's the one it was running
I'm pretty sure I'm running 1.48 though.
I'm in Canada
edit: So far I'm running at 100% but only started it a few minutes ago.
On another note, my 4870 is running at 85-86mh/s stable.
edit2: after making sure I have 1.48, I'm still getting about 4-5%
edit3: After a bit more tweeking, I now have my 4870 up to 88-89mh/s. Sweeeeeeet
So, after doing that, my rejected is up to 23%.
All I did was turn on phatk. I had fastloop on before too when I was getting 4%. I've since turned both off and I'll look into both to see what exactly they do. Ah being a nub.
Fastloop: the fast loop argument for Phoenix. Can possibly increase mining speed if enabled.
phatk: uses the phatk kernel, optimization for HD58xx series only I think? You MUST have phatk already inside the kernels folder.
I took out all flags (bfi_int vectors worksize=128) and now mh/s is back up to 89. Before taking out those flags I was at 85mh/s with 10% rejected.
edit: Just turned off fastloop, currently have 13 accepted and 0 rejected while still getting 89mh/s. Will let it run for a while like this.
annnnnd same issue. 11% rejected as of now.