Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner

I just found out that there are 2 type PSU for L3+

* APW3++ will cost 105 USD
* APW3++ for L3+ will cost 115 USD

The different only the connector, 5 pair (10 connector) and 9 pair (18 connector)

Its cost wise if we choose 9 pair since its could power up 2 L3+ at 220V,
BUT.. i need another view or opinion such as temp, power and effect to the L3+ for long run,

At 220v, each L3+ uses 750 watts (more efficient) and the APW3++ is definitely capable of supporting 100% load 24/7 (unlike consumer grade PSUs). I would highly recommend saving money and going with the 18 connector version if you already have 220v power. We've been running a couple sets in this configuration for months without issue. Total power draw from the wall is 1500w per pair.

Thanks for your review
Any others comment about double L3+ with single bitmain PSU?

Well as long as everything with my order works out fine... I ordered enough of their PSU's to use one per two L3+'s. Even if they do pull slightly more than 750w, you could always slightly underclock so they draw less power, so you're not spending twice the amount of money on power supplies.