Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.0 (Windows/Linux)
Ok so I did the my first successful 1500 strapping on my two rx 470 4g. One is at 23 mh/s and the other 22. Up from around 19.5. Is that good? What can I do next for more performance!
1150 MHz core clock, 2000 - 2100 MHz memory clock should get you to ~29 MH/s stable with a good timing strap bios mod. Also run HWinfo 'sensors only' to check for memory errors and reduce the memory clock by 25-50 MHz until there are no errors.
Im up to 26 mh/ each now. at 1150 1950 -70 voltage. Past 1950 is black screen. Not bad for 470 4g
It should be higher. Try increasing the -ethi to 8. My eight card mixed RX 570/570 4GB/8GB rig is getting 28.5 to almost 30 MH/s dual mining UBQ.
https://image.ibb.co/hEa7Rv/Screenshot_from_2017_09_05_03_34_35.png
If you are on Windows mining ETH make sure you have the blockchain drivers with the epoch Dag fix patch.
you got that 28.5-30 mh/s owing to low epoch of Ubiq I believe.
try to mine etc at epoch 144 and you will see.