Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.0 (Windows/Linux)

Quote from: papasmurf1337 on September 06, 2017, 02:55:34 AM

So, i readed much posts and i am confused little, is latest claymore miner works with win7 blockchain drivers or what is best to use to have back results on our RX 400/500 models back to 30mh/s ?
I know there was much argue about that but there was also much incorrect answers so what is final conclusion, because i refuse to use win10, only win7.
What must be used to work with undervolt and etc?

I have rx570 and rx580 both with Hynix, on win 7 they are at 30mh/s. With new Claymore miner, undervolting works with AB 440 beta 16, but you can set it in a bat file.

Quote from: kkourmousis on September 06, 2017, 11:33:07 AM

Quote from: Kumic on September 05, 2017, 02:11:24 PM

Quote from: kkourmousis on September 05, 2017, 09:40:25 AM

How many of them do you have?
Have you checked HWInfo for memory errors on your cards?
What is your power consumption per card?
What are your overclock / undervolt settings?

Well I only have Hynix ones but those numbers does not sound too bad..
If I would change something I would increase the -dcri parameter in order to reach 900mh on DCR (the sacrifice in ETH actually has a minor stability benefit - less fluctuations- at least for me)

Windows 7, Robinhood drivers, AB 4.4.0 beta 16, Claymore miner v10.0
My core clocks are locked at 1300MHz for both rigs and no matter what I put in AB it won't change a thing, so I change it in batch file with -cclock
My -dcri value is 25 I think it's best for me.

Is ETH+LBC dual mining more profitable with a new v10.0 miner?
Thanks

Are your cards 8GB or 4GB?
Your clocks are very high, have you checked HWInfo program for gpu memory errors? I bet you have millions...
I have foundr -dcri to have impact on fluctuations. Personally I chose to sacrifice some ETH speed for some stability there (I am mining at -dcri 30)
Why do you use AB, why don't you set core and memory clocks and voltages, all from the bat file? Claymore did so much work for this, give it a try
These are my bat parameters: -esm 0 -estale 0 -asm 1 -dcri 30 -cclock 1140 -cvddc 875 -mclock 2150 -mvddc 850 -tstop 80 -tt 70 -fanmin 15 -fanmax 85 -mode 0
As for the most profitable coin to dual mine, best thing to do is try them all, write down your numbers and do your calculations. But first you should stabilize your settings

Thanks, man. Great info.
My cards are with 4gb.
I will check it and try to play with them when I find some time.