Guys on P106 Maxximus007_AUTO_TEMPERATURE_CONTROL dont work. When temp reach target_temp and go above script do nothing((((
If anyone have to work it on P106. Plz write how.
What is your target temp and minimum fan speed ?
What are the individual temp limits? (even if its set to no)
Manual fan = No ?
maxximus auto temp = yes ?
Maxximus007_AUTO_TEMPERATURE_CONTROL="YES"
MANUAL_FAN="NO"
# Maxximus007_AUTO_TEMPERATURE_CONTROL
TARGET_TEMP=65
__FAN_ADJUST=5 # Adjustment size in percent
POWER_ADJUST=0 # Adjustment size in watts (i dont want to down PL, but i try to use any (1,2,3,4,5) and nothning happen)
# Difference in actual temperature allowed before action: Works only if current is BELOW target temp
ALLOWED_TEMP_DIFF=3
# Restore original power limit if fan speed is lower than this percentage
RESTORE_POWER_LIMIT=99
# lowest fan speed that will be used
MINIMAL_FAN_SPEED=60
INDIVIDUAL_TARGET_TEMPS="NO"