Post
Topic
Board Hardware
Re: GekkoScience 2Pac BM1384 Stickminer Official Support Thread
by
licutis
on 14/09/2017, 14:34:57 UTC
./cgminer -o stratum+tcp://pool.ckpool.org:3333 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr -p x --suggest-diff 32
 [2017-09-14 22:08:06.815] Started cgminer 4.10.0
 [2017-09-14 22:08:07.349] Probing for an alive pool
 [2017-09-14 22:08:07.453] Found 2 chip(s) on GSD 1
 [2017-09-14 22:08:07.455] Found 2 chip(s) on GSD 0
 [2017-09-14 22:08:17.463] Waiting for work to be available from pools.
 [2017-09-14 22:09:07.388] No servers were found that could be used to get work from.
 [2017-09-14 22:09:07.388] Please check the details from the list below of the servers you have input
 [2017-09-14 22:09:07.388] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers          
 [2017-09-14 22:09:07.388] Pool: 0  URL: stratum+tcp://pool.ckpool.org:3333  User: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr  Password: x
 [2017-09-14 22:09:07.388] No servers could be used! Exiting.

I don't think this is the wrong input which is in the "=How to Run=", please help!

This appears to be a network/pool issue, not a 2pac issue. Try another pool like Slush. Also verify connectivity with the pool (eg: telnet pool.ckpool.org 3333) and check with your pool operator.

Are you intending to donate all your mining to sidehack? Correct me if I am wrong, but that's the purpose of the 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr address. If you don't understand you should use a pool with an online wallet like Slush until your bitcoin knowledge is more developed.