I have 1 3-module and 3 4-module Avalons ordered in Batch 3 and am trying to make sure I have everything set up properly before they arrive. I've read through many of the posts here and am just looking for feedback from those with first-hand experience with Avalons to see if I missed anything.

For the PSUs, I'll be using an 850W, Gold certified, single rail for the 3-module unit and 1000W, Gold certified, single rail for the the 4-module units.

The power management is the part I've had the most trouble understanding. I'm going to check the outlets in my apartment to find out which are on different wires (pardon my layman terminology, I'm sure I'm not getting it right). It sounds like I should be safe plugging in at most 2 Avalons per wire, assuming no other appliances are sharing that wire, is that right?

I was originally looking at getting a UPS for each Avalon, but a few posts here convinced me that they shouldn't be necessary, especially since I live in an area with infrequent black/brown outs (Seattle). I'd still like to be able to remotely restart the Avalons in case of any hangups, and of course protect them against power fluctuations, so I've settled on using "Web Power Switch 7" from http://digital-loggers.com/lpc.html. Would these be able to adequately protect 2 Avalons plugged in to each, or should I get 1 per Avalon? Am I correct in understanding that I would be able to remotely reboot the Avalons with these, even after a power outage?

Thanks in advance!