Re: [85+PH] KanoPool kano.is 0.9% PPLNS US,DE,SG,JP,NL,NYA 🐈

Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:

I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:

I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000

I've seen in the forum some problems about that and says it is a board problem.

My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad

Here is a picture of what I'm telling you:

You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.

I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).

Hello Apprentice I tried to put the screenshot but I do not know why it does not appear

I clicked on "Insert Image" then I put the address, lets see if it works...

The board I must buy is the one is in the bitmain address?

Do you guys have any guid how to do that?

I hear good stories about http://bitmainwarranty.com. They are US-based, might save you a lot of delay and trouble going in and out of China. Have you tried taking the power off your S9 for some time, and then powering it up again (from the image it looks like that). Might help boot the board to life again.