Post
Topic
Board Mining (Altcoins)
Re: [OS] nvOC easy-to-use Linux Nvidia Mining
by
siforek
on 19/09/2017, 07:05:47 UTC
Thought I would give an update. After adjusting the power settings and doing some specific troubleshooting I have gotten the rig stable for 24 hours.

I took fullzero and Maxximus007 suggestions on the power settings and give it a bit more with more modest OC. It seems to have resolved the issue, as well I have found that one of the cards was not liking bigger OC's while the other 5 worked fine.

This was the outcome.
ETH - Total Speed: 180.068 Mh/s, Total Shares: 2000, Rejected: 0, Time: 15:48
ETH: GPU0 30.198 Mh/s, GPU1 30.240 Mh/s, GPU2 30.186 Mh/s, GPU3 29.500 Mh/s, GPU4 30.086 Mh/s, GPU5 29.857 Mh/s
SC - Total Speed: 1200.451 Mh/s, Total Shares: 429, Rejected: 0
SC: GPU0 201.322 Mh/s, GPU1 201.599 Mh/s, GPU2 201.240 Mh/s, GPU3 196.667 Mh/s, GPU4 200.575 Mh/s, GPU5 199.048 Mh/s
GPU0 t=62C fan=75%, GPU1 t=48C fan=75%, GPU2 t=64C fan=75%, GPU3 t=61C fan=75%, GPU4 t=60C fan=75%, GPU5 t=49C fan=75%

As for the settings, I have the following settings:
5 cards:
Overclock
cc 100
mc 1275
Powerlimit: 125 watts
1 card:
cc -100
mc 1225
Powerlimit: 120 watts
(this card does not like OC had to tweak it some for it to not cause instability within the rig)

Total watts from the wall: 866/867

I am still taking fullzero advice and adding 4 GB more of RAM it will be here in the next few days.

Maxximus007 or fullzero if you have a BTC,ETH address I would like to send you a small thank you for the help on troubleshooting.



Just wanted to let you know following similar/near identical OC configs on my 1070s has had great results! I am getting a stable 31.5MH/s from each of my 1070s Smiley