Finally updated to v0019 and went headless because v0012 crashed and somehow corrupted the USB.
I am running 12 ASUS P106 mining cards remotely since they have no video out. This free's up my MSI1060 so I can put it back in my gaming pc (yeay I can game again).
All cards set at 150/900 115w and temps set at 70. I tried higher over clocks even small ones and the miner was crashing.
Currently just running Ethminer
Miner has run flawlessly for 48 hours so far. Averaging 283MH/s on ETH
Mining nanopool asia1 and almost no stale solutions
I am pretty happy, tomorrow I will set up Telegram and set up Dual Mining and see what I get. I look forward to getting telegram working.
Big thanks to FullZero
I am running 12 ASUS P106 mining cards remotely since they have no video out. This free's up my MSI1060 so I can put it back in my gaming pc (yeay I can game again).
All cards set at 150/900 115w and temps set at 70. I tried higher over clocks even small ones and the miner was crashing.
Currently just running Ethminer
Miner has run flawlessly for 48 hours so far. Averaging 283MH/s on ETH
Mining nanopool asia1 and almost no stale solutions
I am pretty happy, tomorrow I will set up Telegram and set up Dual Mining and see what I get. I look forward to getting telegram working.
Big thanks to FullZero
Why you have such high PL? Try to negative clock the core and a bit more memory clock. I am running p106-100 cards on 90-95PL with -200cc and 1400MC , seems pretty stable to me. On 12 cards the same as yours I have around 300 Mh/s with those settings.
This is my first rig and I just went off what was suggested by someone way earlier in the forums for a gtx1060.
Also, I tried going with lower power with current OC settings and and my hash rate dropped to around 250.
I just updated 1bash with your recommendations and we will see what happens!
Thank you kindly