Finally updated to v0019 and went headless because v0012 crashed and somehow corrupted the USB.
I am running 12 ASUS P106 mining cards remotely since they have no video out. This free's up my MSI1060 so I can put it back in my gaming pc (yeay I can game again).
All cards set at 150/900 115w and temps set at 70. I tried higher over clocks even small ones and the miner was crashing.
Currently just running Ethminer
Miner has run flawlessly for 48 hours so far. Averaging 283MH/s on ETH
Mining nanopool asia1 and almost no stale solutions
I am pretty happy, tomorrow I will set up Telegram and set up Dual Mining and see what I get. I look forward to getting telegram working.
Big thanks to FullZero
I am running 12 ASUS P106 mining cards remotely since they have no video out. This free's up my MSI1060 so I can put it back in my gaming pc (yeay I can game again).
All cards set at 150/900 115w and temps set at 70. I tried higher over clocks even small ones and the miner was crashing.
Currently just running Ethminer
Miner has run flawlessly for 48 hours so far. Averaging 283MH/s on ETH
Mining nanopool asia1 and almost no stale solutions
I am pretty happy, tomorrow I will set up Telegram and set up Dual Mining and see what I get. I look forward to getting telegram working.
Big thanks to FullZero
Why you have such high PL? Try to negative clock the core and a bit more memory clock. I am running p106-100 cards on 90-95PL with -200cc and 1400MC , seems pretty stable to me. On 12 cards the same as yours I have around 300 Mh/s with those settings.
This is my first rig and I just went off what was suggested by someone way earlier in the forums for a gtx1060.
Also, I tried going with lower power with current OC settings and and my hash rate dropped to around 250.
I just updated 1bash with your recommendations and we will see what happens!
Thank you kindly
I just updated 1bash with your recommendations and ran into some issues.
First it crashed immediately after rebooting with the new 1bash. After it restarted it's self again it started mining and the cards do seem to be mining at about 299MH/s.
Issue: About every 3 to 4 rounds of work that comes in, the cards are only registering at about 48MH/s. I am wondering how that is going to effect my over all average hash rates. I am also confused as to why the rates would fluctuate so much.
I will let it go for 6 to 12 hours and see what happens but if someone has insight on that, it would be appreciated.
Update
...it crashed after about 30 minutes. "Illegal memory access" It does not seem these over clock settings are stable.