Dont know if this is on topic, I have 5xlancelots, But 2 of them are not recognized by the computer?
to cover the basics, I am using xp with bitminter client (yes I am a noob) I have swopped around all cables power adapters, Its the same two boards not being picked up, When I scan for all FPGA's on com ports the 2 in question have a different light cycle to the others, The 3 detected quickly show a orange and blue light together, The other two don't. (but all flash together at first)
I have no idea what the 6 push buttons do (have not pushed them) 4 on one side 2 on other.
Any suggestions?
Regards
Squall1066
Did you try to connect them solo each board, or all together?
Try to conect solo each board, so you can determine, the two are OK or not.
When all boards are OK, there can be problem with COM ports in windows. Do you have enough free COM ports?
You don't have to set anything special on the board. Just power on and run the miner on PC. Switches, buttons etc. are there, because it's a development board.