Hello there. I must say- Amazing stuff here.
Just had a one question. My Riggs sometimes restarts and when they do, after restart they enter in bios because the USB isn't recognized. I have to manually replug USB and then it boots up again.
I have a AsRock h110 BTC+ board and a 3.0 16gb usb stick
I've had this bug too on the same boards, unfortunately you need to power cycle, or get an SRR to listen for a hearbeat and do it for you after it stops. (
https://simplemining.net/download/SRR/PDF/SRR-manual-2017-02-10.pdf)
Maybe others have a different solution, but for a remote location this one works reliably for me.
Thanks, this is amazing stuff tho there is one problem with this.
Whenever my computer restarts, It does not recognize the usb until I re-plug it. It just boots straight into bios without doing anything and there is no boot devices available.
I haven't had to deal with this for a while, but from what I remember if the power to the mobo was turned off and the back on, it would re-see the usb.