Sorry I have been crazy busy lately guys. Has anyone tried v0.72 on their rigs? I am hoping some people will have favorable results without needing to use Recovery Mode to get past their first boot. I will be doing some more testing this weekend and making adjustments as necessary.
Got home late last night and downloaded v0.72 and put it on my Lexar USB stick. Had about 30 mins this morning to unplug the SSD and fire up using Ubuminer. Desktop came up first time and resolution was probably 640 x 480. Desktop was very slow and finally the mouse showed up and rolling over the left menu buttons could take 30 seconds for them to come up. Didn't have much time to do anything else so I'll look at it again tonight. My rig has a ASUS PRIME Z270-A mobo with 5 x 1070 GPUs.
Also is Ubuminer able to use the onboard video display or do I need to plug it into my GPU? I had the monitor plugged into the GPU since I've tried nvOC before--figured it was the same config.
Hi Gary, I'm working on v0.73 now with some improvements but I suspect the odd 640x480 that people are reporting is due to the new setting I have in the grub menu:
nomodeset. I did this to try to eliminate the issues people were having with nouveau startup. Doing some more testing myself on v0.72 to see if I can replicate this issue and then maybe fix it in v0.73 or make it better.
As far as my website being down, it appears to be fine but maybe there was a problem a few hours ago? -Not sure. Please let me know if you can not reach the site once you read this message.