Has anyone had an issue with their blade(s) where they'll mine for a while (minutes or hours) and reboot on a regular basis? Both of mine will run for an hour or so, stop hashing for a couple minutes, and reboot (triggers the failsafe). It's great that they reset automatically, but I'm losing a few minutes of hashing each hour. I'm running them through slush's stratum proxy and they maintain ethernet communication the entire time (the web page stays accessible and they're connected to the proxy).
I tried moving one to another pool (under another instance of the proxy using a different port) and it still does the same thing, although they now reset at different times. It seems like a stratum proxy or pool issue, but I'd expect it to pick back up after a disconnect (if that's what's happening). When the blades go down for a couple minutes, my GPUs keep hashing (although they aren't using the proxy).
I'm going to start digging into it, but I wanted to check to see if someone else ran into the same thing.
I've run into this yesterday when I've tried to mine on old-fashion getwork pool (w/o any proxy). It have reset after several minutes. And I've ceased my counter-science experiments I tried moving one to another pool (under another instance of the proxy using a different port) and it still does the same thing, although they now reset at different times. It seems like a stratum proxy or pool issue, but I'd expect it to pick back up after a disconnect (if that's what's happening). When the blades go down for a couple minutes, my GPUs keep hashing (although they aren't using the proxy).
I'm going to start digging into it, but I wanted to check to see if someone else ran into the same thing.
