Post
Topic
Board Mining (Altcoins)
Re: [ANN] FutureBit Moonlander 2: The Most Powerful and Efficient USB Stick Miner!
by
sunk818
on 04/10/2017, 16:21:02 UTC
I ended up the USB 2.0 7-port hub from Plugable. Same as the USB 3.0 but $10 cheaper. You don't need USB 3.0 as the external power is same on the USB 2.0 versions.


You can try, but sounds like three Moonlander2 will work best. I was planning in using 4 Moonlander2 with this, but worried about Port 5,6,7 as two Moonlander2 will share one regular. Not sure if there will be enough watts for port 5, 6, 7.

https://bitcointalk.org/index.php?topic=1779423.msg17921042#msg17921042
Quote
As I discovered with my 7-port, 60W charging hub from Plugable -- pop it open and look at how the power is distributed.

On the Plugable, it takes 12vdc in and has 3 buck regulators taking that down to 5v  for the USB plugs. That said... 1 regulator feeds ports 1 & 2, the 2nd regulator feeds ports 3 & 4, the 3rd feeds ports 5-7. See where this is going?

After futzing around with 2x of the 2PAC's along with an original Compac just plugging them in 1-2-3 I was unable to run all 3 at decent speed without at least 1 stick dropping out. Looked inside the hub and found ^^ so...

Put one 2PAC on port-2, the other on port-4 and the Compac on port-6 so each stick has it's own 5v regulator.