Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners

Thanks a lot for getting back to me Patrike,

That made some sense now, to have a current entry and an x-minutes ago entry that need to match. I tried a few variations of that as well. Also just for the heck of it I threw a timer trigger in between them on another test ( I know you said its not necessary). I hate to be a bother but I looked thru my logs and within 10 minutes I dipped under 200 but only for a few seconds here and there and it triggered. Its frustrating, every variation of the rule I've tried still triggers even if I dip down under 200 for a few seconds, I'll attach those 2.

https://postimg.org/image/xns7ji6tn/

https://postimg.org/image/pjoos6hej/

I take this still as "currently" it dipped under 200, and "3 minutes ago" at some point it dipped under 200. I know for a fact it didn't stay under 200 for more than a few seconds so I have to be missing something or something else is going on.

Thanks again for the help!

I guess it's possible to have a dip both "now" and "3 minutes ago". Can you try to add a third trigger as well, where you also check for example "5 minutes ago"? Just to test the scenario.

Thanks Patrike,

I have 3 time triggers now, current, 1 minute ago and 3 minutes ago and tested for over 24 hours now. Its the same situation (of course triggered a little less often adding the 3rd time variable). Still though if I dip under 200 "3 minutes ago" and "1 minute ago", then again "currently" for even a second in all of those timeframes, it triggers. I cant believe no one has brought this up before.

Do you have any other thoughts on how to implement a simple trigger of below x hashrate for x time?

In my situation I was just after below 200MH/s for 30 seconds consecutive then trigger to restart the miner.

Thanks again.

I agree that it would be a nice improvement to add a trigger that is looking at hashrate for a specific time like you suggest.
If you look at the actual hashrate in your scenario, is it dropping below 200MH/s that many times within a few minutes? What's the standard hashrate when everything is working fine?

Hi Patrike,

Yes it is on this 8 GPU rig I have 2 troublesome GPUs (2 570s in a 580 rig) that like to drop significantly every now and then (which is whats triggering the only rule I have available for hashrate). Usually they recover fine in seconds but every few days its seems like they stay in that dropped state which is what made me try your rules out. It rolls at ~205MH/s 99% of the time.

Is there any way you can add something like that to the roadmap? Or is that too much of an overhaul?

Thanks.