http://i228.photobucket.com/albums/ee218/stapler17/PART951308196902388-05.jpgI just got this picture from my friend and felt the need to post it. This is our first rig. This is a really old (beige) case so we had some holes to cut for it would work for its unintended purpose. We cut out a hole in the bottom so the gpu fan can breathe, a hole in the back since there wasn't one there, a hole to allow the power supply to fit, another for its cables to reach, and a hole in front to make that fan's life easier. The wood blocks were so that air could come up from the bottom hole, but I don't think this will be upright anymore.
Right now my friend is working on getting the second gpu working. About to try jumping the pcie x1 pins (edit: success!). Both cards are 5830's. The computer on the right is a single rig with another 5830 and we have a fourth card in my friend's desktop. Dedicated ones are overclocked to 875/700 (we're using linux. Can't seem to go any lower on RAM, but we're satisfied where we are right now) and are getting 265 Mhash/s each. When this one goes online we should be getting just over 1 Ghash/s!
