Getting 38.5 Mh/s UBIQ on Vega 56.
Pure open source.. rocm-opencl + sgminer-gm
pp_table being a bitch, so I'm OD'ing the mclk to where I want it, and setting the sclk to level 3.
# echo 17 > /sys/class/drm/card0/device/pp_mclk_od
# /opt/rocm/bin/rocm-smi --setsclk 3
# /opt/rocm/bin/rocm-smi --setmclk 3
# ./rocm-smi
==================== ROCm System Management Interface ====================
================================================================================
GPU DID Temp AvgPwr SCLK MCLK Fan Perf OverDrive ECC
0 687f 60.0c 120.0W 1269Mhz 936Mhz 88.63% manual 0% N/A
================================================================================
==================== End of ROCm SMI Log ====================
Once I get the pp_table working right, I'll be able to lower my voltage.
If you are mining UBQ, you don't really need to use blockchain driver. And with the regular driver the wattman actually works, so a powertable mod is not needed as well ...
But this is a lot of wasted potential tbh.