Good afternoon.
Here are the old requests for which I did not receive an answer:
1. See the photo. Add this for each farm and you can select wallets and pools for each miner separately!!
2. The most ancient mistake that you do not eliminate. Your program sees that my farm consists of 4 maps and why if one card when the transition from one algorithm to another died the farm does not reboot - it's elementary - there were 4 cards became 3 means you need to reboot.
3. Still the same ancient trouble arises with ccmainer Alexis - when in the manner of the error occurs, the error message is displayed. In this case, mining stops and the program does nothing until I manually click on this error on the farm (((
1. I'm not sure what we are looking at here. The first picture shows that you are using a custom pool group for profit mining, and the second picture is showing an empty override directly on the Managed Profit Miner. You would want to leave the override empty, unless you wanted this particular Managed Profit Miner to do something different from the global settings. Or are you pointing out that the override is missing the option for a custom pool group?
2. I think you should troubleshoot why you have a card that is dying first. Do you have adequate power from your PSU? How many watts is it? Do you use risers? Have you tried moving the risers around to see if the problem follows the riser? Do you have your overclock or underclock settings set too far out of range for the new algorithm when it switches to it?
3. What does the error message say? You may want to set a rule that if hashrate falls below a threshold then to reboot the computer. This may help with your missing GPU problem in #2 above as well. Make sure that you set the Managed Miner, or the Managed Profit Miner to autostart so that it will resume mining after the reboot.
1. Yes, the override is missing the option for a custom pool group. Please add as this is a very necessary option.
2. This problem occurs when you go from one algorithm to another. MSIAfterburnerRemoteServer not on all farms, I get into autoloading ((the system either removes it or just does not start it in autorun.) I think eventually you will find a durable replacement for MSIAfterburner and build control into the body of your program.In the meantime, I ask you to add to the monitoring section the ability to determine how many cards are working and if one of them has shut down to reboot the system!
3. I'll try to solve this problem by setting a low hashrate, thanks.
1) "Add to worker name" can be set individually for each Manage Profit Miner. It will however only change the last part of the worker name. Your request is about changing the full worker name?
2) Detection of missing GPU (change from 4 to 3 all of a sudden) is very high on the priority list. I know you have requested this in the past, but I do get a very large number of requests for feature right now so I'm trying to prioritize everything.