Hi everyone,
Today for the second time my rig stop working due to burning of risers sata cable.
I'm still new in mining,
My rig has
Galax Gtx 1060 OC x4
8 GB ram
PSU Corsair hx1200i
Motherboard ASRock H81 PRO BTC R2
I'm using ethos my card are working at 22.5mh/s each, usually they are stable but after few days the sata cable that give power to riser get burned. I'm using only one sata cable with 4 connection at the moment. Should i Just connect only 1/2 GPU to each sata cable?
Thank for your help
you put four gpus on the cable you melted the cable.
And you ask if you should put less gpus.
The answer is yes put less gpus 1 or 2 max.
Go to the corsair website they have the exact cable you need
http://www.corsair.com/en-us/ribbon-style-sata-cable-with-4-connectors-type-3-short-cablehttp://www.corsair.com/en-us/ribbon-style-sata-cable-with-4-connectors-type-3-850mmContents and Specifications
Package contents
One (1) "Ribbon Style" SATA Cable with 4 Connectors, Type 3 (700mm)
Compatibility:
Compatible with all Corsair Type 3 pin out PSU: AXi,
HXi, HX, RMi, RMx, RM, SF, TXM, CSM, CXM
90 percent sure these are what you want.
you can ask the forum
http://forum.corsair.com/v3/index.phpor you can ask jonnyguru forum
http://www.jonnyguru.com/forums/1 or 2 gpus at the most.