Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
Here you got the first photo shows the Missing Variables from Overclocking. I just started the rig to take the pictures and did not give it a chance to warm up. But you see in the left bottom of the picture the power usage for all 6 cards Once warmed up they all hit around 170 to 180 watts.
The second photo, you can see the the core clocks which are above 1900 MHz. Stock they run 1531 MHz and Boost they run 1721 MHz. And the Memory I don't overclock for zcash.
The second photo, you can see the the core clocks which are above 1900 MHz. Stock they run 1531 MHz and Boost they run 1721 MHz. And the Memory I don't overclock for zcash.
Can you snap a pic with that error with your phone? And then one of the clocks in the management console? I enabled the mvddc line thru Tytanick's suggestion. Perhaps that same root/utils/oc_dpm2.sh file on your boot drive is both the problem & solution to your error.
Dude I am not the only one. One of the reasons tytanick push the update 1128 out was because some of the Nvidia users could not overclock! I have listen to the only I think 2 that replied and they said the same as each other said. Here others that are having overclocking problems.
https://bitcointalk.org/index.php?topic=1541084.msg22752842#msg22752842
https://bitcointalk.org/index.php?topic=1541084.msg22785701#msg22785701
Your not listening to me. I cannot change the power limit or the overclock setting. SMOS is not doing what you tell it to. Every time you save and it restarts you watch it scroll down the screen as it loads and come across Overclocking under this line you will see it say Missing Variables. So SMOS did not save or whatever the settings!
if u want help, try to listen to others
good luck
https://bitcointalk.org/index.php?topic=1541084.msg22752842#msg22752842
https://bitcointalk.org/index.php?topic=1541084.msg22785701#msg22785701
Your not listening to me. I cannot change the power limit or the overclock setting. SMOS is not doing what you tell it to. Every time you save and it restarts you watch it scroll down the screen as it loads and come across Overclocking under this line you will see it say Missing Variables. So SMOS did not save or whatever the settings!
As the OS is called Simple you cannot change any overclock or power limit settings! As I been saying in all my post the cards are averaging 177 watts and you cannot change it in Simplemining! The core is overclocked above 1900 MHz. You cannot change it to the stock clock of 1531 MHz or even to the Boost clock of 1721 MHz.
dude we all here using smos, and u are the only one who cannot set the power limit nor overclockif u want help, try to listen to others
good luck