Some ideas for WTM Auto Switch :
WTM AUTO SWITCH is best to set for current profit and current difficulty in whattomine.com as the other 3 whattomine.com options are only show what was in the past.
It is looking for top profitable coin at the moment which usually is the coin with most drop in difficulty.

First of all dont use too many coins as it will make too many switches and you lose time,
WTM auto switch has the option to compare the top coin with current mining coin with the given difference in percent to avoid too many switches for small profits shown.
switching to better coin is good but too many switches means too many miner restarts and each miner get some time to get to optimum speed some thing from 10 to 30 seconds.


So We have some options here.
I tried these 3 combos, each has their own pros and cons, you should try and see which one you like more.

1- Two top coins with no jumpers (10-15 % difference)
This one is the most stable option with least switches as top 10 coins usually dont change too much.

2- Two top coins with 1 jumper (10-15 % difference)
In this strategy jumper is use as a helper to switch between the 2 top coins, because usually those 2 dont get more than 10% difference
so when jumper goes to top from buttom it helps switcher pick the higher coin with less than 10% difference

3- One top coin with 1, 2 or 3 jumpers (20-40% difference)
In this scenario you mine your favorite top coin but when a jumper coin goes hot and drop big difficulty your miner start mining it until its difficulty goes high and become no more profitable
the high difference percent is to avoid jumpers to switch with each other too many times.

I'm sure there are lots of more combos to use, so please share with us your strategies and thoughts .


P.S: Latest WTM Auto Switch does not support multi algo specific overclock (damNmad awesome work) For Now, I'm Workin on to find a workaround for it.
So set damNmad_ALGO_SPECIFIC_OC="NO" and find a mid level OC to cover all the coins you chose to mine.