Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hi guys, Received my L3+ yesterday and I was so excited 
, however, the excitement didn't last for long, seam mu L3+ is now working only on 3 hashing boards 
Yesterday I notice that 4th board was having ASIC# 36 instead 72, and today when I powered up the miner only 3 hashing boards are showing.
Now what to do before writing to Bitmain???
I have tried switching on and off the miner and changing the PCI power connectors but no use.
I am using APW3++ on a 240V power grid.
Any advice is appreciated before I raise a ticket with Bitmain
, however, the excitement didn't last for long, seam mu L3+ is now working only on 3 hashing boards Yesterday I notice that 4th board was having ASIC# 36 instead 72, and today when I powered up the miner only 3 hashing boards are showing.
Now what to do before writing to Bitmain???
I have tried switching on and off the miner and changing the PCI power connectors but no use.
I am using APW3++ on a 240V power grid.
Any advice is appreciated before I raise a ticket with Bitmain
Double check if the PSU is feeding the 4th board with the appropriate power.
If that doesn't help, read issue 6 here:
https://bitmainhelp.zendesk.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-