Post
Topic
Board Mining support
Re: Beware of cross wired server pcie cables
by
philipma1957
on 14/10/2017, 15:19:43 UTC
Now you get me worried.  But I've checked the cables from parrallel and there is written 16AWG. So I think they are ok. If someone knows that the cables are not ok please let me know. I'll purchase from sidehack if necessary . I'm about to cut one of the spares to check is it aluminium or copper inside.

dude i did that on my cross wired cable it is silver color not copper color  so it is aluminum

basically

the 2400 watt psu is very good
the boards are good > most likely
the cables are so so

psu = a 9.5 and if you run 1 avalon 741  or 1 s-9 it goes up to a 9.7

boards = a 9  and I may drop that or raise with  long term testing

cables = a 7   would have been an 8 but the 1 of 80 cross wired lowers my score
dropped cable rating down
cables = a 6 of 10  due to the cross wire
cables = a 7 due to aluminum

This is for a 240 volt setup

at the moment they sold out of the 2400 watt delta psu

so they are only attractive on this deal

good for a lower powered 120 volt setup.

http://www.parallelminer.com/product/hp-750w-he-94-power-supply-7-pci-e-16awg-psu-kit-for-antminer-l3-litecoin-miner-ltc/

I have an affiliate link for them if the gear above works for you.

sidehack's 1200 watt hps deal is better then theirs and I don't have an affiliate link with sidehack