44 minutes later, with fan 10% and voltage -1 . same situation
i will switch to raspb3 now
Update: no change.
Checked both PSU (all 4 braker boards). Voltage ok: 12.4 V
Can somebody please post a CGMINER API Log from the interface?
Thanks!
once again you don't wait 2 hours it takes time to show.
so what do you have after 44 minutes?
which is not long enoguh to test.
at -1 you should go over 14th but it takes more then 44 minutes.
although I don't like that row of zeroes you have.
at the moment I can not access my 721's or 741's
but I can tell you 44 minutes 7 minute is too low. 144 minutes and you got to 11.9 th
just run a long test stop looking at the logs.
the fans can be at 30%
they auto set and won't go lower then the number you set to
so 10% setting means they do not go under 10%
and 20% setting means they do not go under 20%
and 30% setting means they do not go under 30%
other questions you are doing rasp pi 1
what is your internet hook up?
and do a long test with kano not 44 minutes
just set it and look at it in 10 hours.