I have 2 issues with Claymore 10.0 (Win10, blockchain drivers, 6card rigs running 570 and 470 cards)
1) After initial rig start (i.e. after powering or resetting the whole rig) Claymore 10.0 runs with lower hashrates (for example about 23-25Mhs with 470/570 cards). After stoping the miner and re-run .bat, I getting normal rates (i.e. miner has to be restarted and operates as expected only after 2nd run, never from the first)
2) Unpredictable hashrate drop during mining for some cards in rig (usually 1 or 2 of them). Rate drops and keeps at 23-25. The only solution I found is to restart Claymore.
Any comments guys?
For point 1, i could be that the batch is starting before the software you use to apply the OC or something like that. You could try adding a few seconds delay in the start of the bat, ex: "timeout 20"
Nope. Tried inserting a delay in task trigger - no effect.
This became a SOP for me: rig boots and stats Claymore with 28, 25, 25, 25... etc, when I see this I do: Execute "reboot.bat" and after it boots again its 28 for all