Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
https://aurora-qubit.miningpoolhub.com/ - main menu error
need https://auroracoin-qubit.miningpoolhub.com/
need https://auroracoin-qubit.miningpoolhub.com/
Fixed it. thanks!
Will you support BitCoin Gold? Will we be able to mine it here?
I'm not sure at this moment.
@miningpoolhub I started some hours ago using your zcoin pool, checked just a minute and:
Est. Shares 142,393 (done: 69.81%)
Your Valid 87.7301
Your Invalid 28.8445 (24.74%)
Any tip for improve this insane amount of invalid shares?
Im using last djm's ccminer like its recommended
Thanks in advise
Est. Shares 142,393 (done: 69.81%)
Your Valid 87.7301
Your Invalid 28.8445 (24.74%)
Any tip for improve this insane amount of invalid shares?
Im using last djm's ccminer like its recommended
Thanks in advise
Djm34 build sends normal shares and previous block's shares.
Those previous block's shares are totally useless and treated as invalid. So it's intended action actually.
I believe that invalid share percent goes up and down radically. It should be okay most times, isn't it?
Same problem with the latest djm34 ccminer.
Tested both versions and different OC settings. Every round i am getting about 5-30% invalid shares in dashboard. No invalid or rejected shares on miner side.
It's not okay, because amount of invalid shares decrease hasrate and block reward.
djm34's ccminer build sends stale shares and this is expected result.
Maybe asking this to ccminer dev would be more helpful.
Djm34 build sends normal shares and previous block's shares.
Those previous block's shares are totally useless and treated as invalid. So it's intended action actually.
I believe that invalid share percent goes up and down radically. It should be okay most times, isn't it?
Just 1 more question:
Any way to check average hashrate for a specific pool(for example for 24h)? I cant find it
Thanks in advise
Click "Graphs" page for that pool. You will see 24h average valid hashrate.
Mr MPH,
Why on earth adding Aurora, a coin that wont be mined by many or asked by many even, while we have been eagerly and now impatiently waiting for Zen, Hush, Lbry, Pascal, Decred? I don't see the point of this and feel really let down by the pool. Disappointed.
It's not even that profitable. Very low on the list by any means.
Why on earth adding Aurora, a coin that wont be mined by many or asked by many even, while we have been eagerly and now impatiently waiting for Zen, Hush, Lbry, Pascal, Decred? I don't see the point of this and feel really let down by the pool. Disappointed.
It's not even that profitable. Very low on the list by any means.
Sorry I added aurora because baikal ASIC miners asked it.
The reason why I added Aurora first is it didn't need much test to open pool. But Zen, Hush, Lbry, Pascal, Decred uses special code to operate.
I'm planning to add Zen this week.
no zcash transactions in the last 3 hours, rig running normal..
just a delay?
just a delay?
Check zcash Blocks page. As soon as pool finds block, transactions will be added.
MPH is giving me less profit than Nicehash using 2 GPUs.. 
Can someone explain why and how MPH operates like that? first it mines the most profitable then it exchanges at the worst rate ever...
Can someone explain why and how MPH operates like that? first it mines the most profitable then it exchanges at the worst rate ever...
There's pros and cons.
Block reward depends time to time.
Miningpoolhub distributes reward when it actually finds block. Which means you would get much sometimes and less sometimes.
Nicehash credits when you rent mining rigs. But it's fee is quite high.
Exchanges are done in realtime as soon as coins are confirmed from exchange site. If you want to exchange yourself, you can manually withdraw and exchange.
First post yay! Anyways, I've been mining at MPH for awhile now and I've found that if I just keep everything pointed at a single pool I'll make a significant increase over what I can at Nicehash. Pick the most profitable coin or coins you can mine on MPH and just mine to that pool constantly. I've tried algo switching with multiple pools and programs and the most profits (for me at least) always come from MPH when I just mine to one pool. You should also keep in mind that when exchanges are made you might be exchanging across different coins, which can cause a loss of profits also. If that seems to be affecting you, just exchange to BTC, LTC, or ETH and then buy whatever you want at whichever exchange you please. You also have the option to just keep what you mine and either hodl or sell on your own. Yet another reason I stick with MPH. 
Just some friendly advice.
Just some friendly advice.I've tried a couple auto-switching programmes, such as aaronsace's MultiPoolMiner (it's got a good, but time consuming banchmarker), but I've found it more convenient just to manually select the most profitable coin to mine using either Whattomine or the list on the front page of MPH.
There is the occasional outlier on the MPH page when some coin, such as Sexcoin, suddenly becomes the most profitable for a few minutes, this is where auto-switching falls down, if the auto-switcher detects this outlier then you could end up mining a very low profit coin for quite some time until the auto-switcher checks again.
Well auto-switcher checks every few minutes. The reason why it didn't switch is that sxc pool didn't find block yet.
I believe auto switching is absolutely better when mining is done at one algo switching because there's no overhead switching coins.
Multi algo switching is quite different. You may not run optimized OC for each algo and there's some overhead time switching different algo coins.
I tested Baikal miner to mine Dash only and Multi algo switching for few weeks and found that Multi algo switching was better in a long run.
Im connected.. finally... but its not showing any activity on the webpage.. mining with L3+...
I set up the hub worker and set up the scrypt worker.. but nothing..
what am i not doing right?
thank you in advance.
stratum+tcp://hub.miningpoolhub.com:17001
username.1
Whateverpassword
I set up the hub worker and set up the scrypt worker.. but nothing..
what am i not doing right?
thank you in advance.
stratum+tcp://hub.miningpoolhub.com:17001
username.1
Whateverpassword
Have you changed username.1 to your actual id "username".1 ?
For the MSC i'm wondering why i'm earning regular payout with a significant difficulty decrease ? I expected at least something higher.
Becuase miningpoolhub's MSC forked to wrong chain while doing last hardfork.
This was because of Musicoin dev's fault releasing wrong binary at github.
https://github.com/Musicoin/go-musicoin/releases
I reported this issue at bitcointalk but still dev isn't fixing it. I don't know whether dev is working or not.
There are blocks found that dont show up on the zcash pool - what is happening?
As of this moment, the last block found on the pool is 200868, but there are many blocks found shown on the block explorer - 200880, 200882, 200884, 200897, 200914 and 200915 as of now.
what is the reason?
As of this moment, the last block found on the pool is 200868, but there are many blocks found shown on the block explorer - 200880, 200882, 200884, 200897, 200914 and 200915 as of now.
what is the reason?
Every pool info is updated within certain time period. Sometimes it's delayed due to maintenance or backend jobs.
https://zcash.miningpoolhub.com/index.php?page=statistics&action=blocks&height=200985&prev=1
You can find those block info at Blocks page.
Is the MONA pool showing the right hashrate for everyone? For me it shows only half what the miner reports (ccminer Palagin). No rejected shares.
You would see less hashrate if you switched just few minutes ago.
Check both vertcoin and monacoin's Graphs page if you are using lyra2re2 auto switching port.
Mona slowly shows
and difficulty rocket UP
ADD ZEN and LBC !!!! pool please!!
and difficulty rocket UP
ADD ZEN and LBC !!!! pool please!!
Yeah I believe I'll add ZEN this week.
Hi I know you probably keep hearing this but could you please add ZEN I've been using your pool for a year and had to switch to suprnova because there's no ZEN support I'm sure a lot of miners would ZEN if implemented
Yeah thank you for support and feedback. I'll add ZEN very soon.