Something strange happens with my miner's monitor
I use Claymore monitor 3.4, miner version 10.0
1 or 2 rigs are constantly loosing connection with monitor. I.e. Monitor turns red and in "lost" state for corresponding miner.
While miner actually works (with pool) but with message:
ETH: GPU0 28.009 Mh/s, GPU1 28.529 Mh/s, GPU2 28.366 Mh/s, GPU3 27.995 Mh/s, GPU4 28.001 Mh/s
server: bind failed with error: 10048 (port for remote management is busy, use different -mport value), next attempt in 20sec...
I tried different -mport values but it doesn't help. It happens since Saturnday. I use read-only mode and internal IP
LOL. I had similar behavior, no any error msg in logs though: single worker (out of multiple ones in the same LAN) was constantly loosing connection. And it seems I just fixed it in a
really weird way: get EthMon 2.9, place your config into its dir(to speed things up), remove all related entries from win firewall, run it and allow both public & private profiles = that's it. Have NO idea why it works now... or why it wasn't working before.
If I do the same procedure with 3.4 it wont solve the problem... I'm really confused.
EDIT:
@Kukus Please try and report back.