Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.0 (Windows/Linux)

I have 2 issues with Claymore 10.0 (Win10, blockchain drivers, 6card rigs running 570 and 470 cards)

1) After initial rig start (i.e. after powering or resetting the whole rig) Claymore 10.0 runs with lower hashrates (for example about 23-25Mhs with 470/570 cards). After stoping the miner and re-run .bat, I getting normal rates (i.e. miner has to be restarted and operates as expected only after 2nd run, never from the first)

2) Unpredictable hashrate drop during mining for some cards in rig (usually 1 or 2 of them). Rate drops and keeps at 23-25. The only solution I found is to restart Claymore.

Any comments guys?

Same issue here...as mentioned 470's and 570's
Has anyone found a fix for this ?
I have as instructed tried the timeout and it does not work
Thanks in advance

Are you talking about problem numbered 1 or numbered 2?
As to No.1 I was discussing with few people and they have similar problems, not solved. I am not worry too much as it happens only at first start.
But No.2 really makes me headache, because unpredictable.

I am having a # 1 issue....but

on #2 add if using the .bat file --tt 70 --fanmin 50

the reason is that the cards are throttling down due to temp

see if that helps

Put these in the config file:

-r 0
-minspeed

by using those commands, miner will restart if it cannot reach X hashrate in 5 minutes.
this is tried and tested as per my experience.

Friends and my MSI 570 with Hynix chips are snaping today like crazy.
We use Claymore 10.0, AB 4.4.0. beta 16, Driver 9.14.10.01293. Crismon BETA
Until today everything was ok.
What's happening?

We tried to push fans more in order to drop temperatures on cards and it worked. I think critical temp. is near 60C, which is stupid. Is there any other solution for this?