Yeah, a reset was a bad idea. Next time just change the pool configs instead of blanking the whole setup.
It's tuned to run 550MHz with a quiet fan setting but the factory reset took it back to 700MHz on auto fan. Running voltage is a hardware-level setting on the boards themselves though, so that's not hosed up. Just set it back to 550MHz and fan around 30% and I bet it'll level out.
It's tuned to run 550MHz with a quiet fan setting but the factory reset took it back to 700MHz on auto fan. Running voltage is a hardware-level setting on the boards themselves though, so that's not hosed up. Just set it back to 550MHz and fan around 30% and I bet it'll level out.
Awesome, thanks! Yeah the problem was it wasn't connecting to the network at all, so I couldn't get into the UI to set the pools or anything.
I set it to 550MHz w/ 33% fan and it's humming away at 3.7TH/s with temps in the 60s, SOOOO much quieter now!
