By the way, a little off topic, but do you guys think it's ok to run 12 GPUs (all 1070s except for 2 which are 1060s) on two EVGA G3 850W PSUs? I downvolted all of the cards and each 1070 is right around 100W/piece and 1060s are roughly 80W. Been stable now for over a week, just to get some feedback regarding this setup.
There is no part of me that will ever understand the idea behind taking 10 cards and intentionally turning them into 7
I am with @ComputerGenie. Is there a reason you are not running individual power limits and clocks? Worst case, I would remove the 1060's and just run the 1070's correctly.
Agree,
80 W for 1060 is not so low, but 100 for 1070 is too low,
what are your hash rates with 1070 ?
I run my 1070 rig at 125 W, oc 125, cc 600 getting 460-470 sol/s
and 1060 rig with 85W, oc 125, cc, 600 getting 300 sol/s
Been mining ETH and my hasharates have been 30-31 per 1070. I never thought you could have a PL "too low" if it's within the supported wattage of the card. Of course, some GPUs, like the MSI 1070 Gaming X requires minimum 115 watts but some other 1070s can go to as low as 90 so that's why I say average is roughly 100W per card. It's bee stable like this for nearly 2 weeks now so I don't see why it's a big issue if it's stable?