Quote from: fonyo on November 06, 2017, 07:34:36 AM

I may have been reading the Block Shares graph on the Blocks page incorrectly.

So if the Actual (orange line) and Average (green line) are below the Expected (blue line), does it mean:
1. it took us less time (less shares) to find blocks OR
2. we found less blocks

In the last hour we had a 108% luck (unlucky), yet if the first case above was true, it would mean we have found blocks quicker than expected, right? However, the Block Overview below shows the opposite and makes me think the second case is true.

Can anyone confirm or even elaborate further?

Number 1 is correct.

Mathematically ideal, expected number is 100%. If it took more time than expected then it increases.
0 <-> 100 <-> infinite
Lucky <----> Unlucky
Lower the better.

Blocks page shows last 20 blocks so it may and may not reflect last hour, or last 24 hours or last 7 days luck.

Quote from: ivan1109 on November 06, 2017, 01:29:18 PM

Hi. What about pirl coin? Will it be added on miningpoolhub?

Not sure at this moment. Pool usually add pools which is listed on bittrex or poloniex.

Quote from: Bwtmn7 on November 06, 2017, 01:52:55 PM

i wonder if i use multipool miner can i get the miner working some algorimth isnt shown in the multi alto auto switch configuration?

MultiPoolMiner doesn't rely on pool's multi auto switch configuration.

Quote from: carlo_0000 on November 06, 2017, 02:13:25 PM

but if we autoexchange to something else than bitcoin

who much fees exactly we pay

fee on sending to exchange, then it s sold in btc i guess, than buy the other coins and withdraw
and so it happen with each small transaction?

looks like we lose a lot in fees

sending to exchange is paid by pool.
Sold in btc and buying other coin pays fee in rate of amount. This is unavoidable even you exchange manually.
Withdraw fee is also charged. This is paid per withdrawal request and not related to amount. Pool withdraw them when it exceeds certain amount to lower the withdrawal fee.
Also fee is paid in 1/n in this case. You pay much less than your manual exchanging.

We have to pay fee to exchange site whether we use auto exchange feature or not.

Usually you save much money if you exchange monero from auto exchange because monero's network fee is quite big that sending small amount is very harmful.
Pool sends them in bulk so pool auto exchange has fundamental advantage over manual exchanging in some cases.

Quote from: nitrobg on November 06, 2017, 02:26:51 PM

Quote from: miningpoolhub on November 06, 2017, 06:52:53 AM

3. Low hashrate is not that ideal usually. Pool would exclude your shares by PPLNS method if your shares are inserted too rarely.
(Pool thinks you are hopping pools)

Does this affect the multipool miners? How long do I have to mine on a given algorithm so my share would count?

Pool hopppers got more than their contribution before because they used vulnerability on calculating block based contribution (This is called PROP)

PPLNS is not just invented to punish pool hoppers, but to distribute fairly.
PPLNS considers time based share contribution so this does not affect normal miners. PPLNS is known to be the most fair method currently.

Quote from: DrX on November 06, 2017, 04:19:58 PM

Quote from: ivan1109 on November 06, 2017, 01:29:18 PM

Hi. What about pirl coin? Will it be added on miningpoolhub?

+1 for this (PIRL is bigger than musicoin now)

I hope we could get some coins to mine faster...before we lose the momentum but i know you have lot to do

Pool usually open pool that is listed on bittrex or poloniex.

Quote from: SERHYG on November 07, 2017, 04:49:04 AM

hey guys
How are you!
I have a problem, I am mining ethereum 1 hs ago and no statistics appear in the pool!

what will be the problem?
I have installed the latest amd drivers 17.40 will this be the problem?

Thanks for the help

Do you see hashrate on pool? What commandline did you use?

Quote from: promomei on November 07, 2017, 09:43:16 AM

Quote from: adore on November 07, 2017, 09:08:15 AM

Quote from: promomei on November 07, 2017, 06:11:13 AM

Hi Guys
Im new to this pool

When i get my coins ? (0.5 zcoin)

Confirmed   0.00000000
Unconfirmed   0.50542130
Confirmed for Auto Exchange   0.00000000
Unconfirmed for Auto Exchange   0.00000000

My pays out stay at 0.1 Zcoin

Any body ?

after 130 confirms

Thanks
How long its takes usually?

About a day.

Quote from: kingkos on November 07, 2017, 10:06:33 AM

I withdraw my manual payout in miningpool hub since yesterday But i didnt receive the money in bittrex. Any help maybe it stock in the air.. but I saw its completed

What coin was that?
If it's ETH and if you didn't send more than 0.1 ETH, then bittrex will not show your coin at all.

Let me know what coin you sent and your id.

Quote from: fonyo on November 07, 2017, 11:33:42 AM

MPH, have you looked into adding BitcoinZ? It looks promising due to its decentralised nature. Could also work well with the rest of the equihash algos in multipool setup.

https://bitcointalk.org/index.php?topic=2166510.0

Thanks I'll check.

Quote from: curr3ncytr4d3r on November 07, 2017, 12:34:45 PM

Quote from: miningpoolhub on November 06, 2017, 06:52:53 AM

Quote from: curr3ncytr4d3r on November 02, 2017, 07:57:23 PM

On the FAQ page you have a list of commands, one for each algorithm. However when I have ethminer in that list it never gets passed that:

ℹ 20:48:47|ethminer Connecting to stratum server europe.equihash-hub.miningpoolhub.com:12023
ℹ 20:48:47|stratum Connected to stratum server europe.equihash-hub.miningpoolhub.com : 12023
ℹ 20:48:47|stratum Starting farm
cl 20:48:47|cl-0 No work. Pause for 3 s.
cl 20:48:47|cl-1 No work. Pause for 3 s.
ℹ 20:48:47|stratum Subscribed to stratum server
ℹ 20:48:47|stratum Worker not authorized: myuser.first
ℹ 20:48:47|stratum Disconnecting
ℹ 20:48:47|stratum Stopping farm
cl 20:48:50|cl-0 No work. Pause for 3 s.
cl 20:48:50|cl-1 No work. Pause for 3 s.
cl 20:48:53|cl-0 No work. Pause for 3 s.
cl 20:48:53|cl-1 No work. Pause for 3 s.
cl 20:48:56|cl-0 No work. Pause for 3 s.
cl 20:48:56|cl-1 No work. Pause for 3 s.

how to make sure ethminer exists? I have:
~/ethminer -FF exit --farm-retries 0 -G -S europe.equihash-hub.miningpoolhub.com:12023 -O ${USERNAME}.${WORKERNAME}:x -FS exit

thank you

Maybe setting "--farm-retried 0" would do it. I haven't tested it, but read the source code.

I really see "--farm-retries" and not with a d (just as I had it) in the code: https://github.com/ethereum-mining/ethminer/blob/master/ethminer/MinerAux.h#L138

And I got it from the batch file examples in the FAQ from miningpoolhub.com so I think the example is not working as described.

If it is not working maybe better change the example...

Well actually the problem is that it worked well with previous genoil-ethminer.
There's several ethminer released from different dev with same name.
I added claymore miner option on FAQ page now.

Quote from: yslyung on November 07, 2017, 11:20:28 PM

been randomly getting this recently . . .

[2017-11-08 07:18:40] Starting on stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581
[2017-11-08 07:18:40] NVML GPU monitoring enabled.
[2017-11-08 07:18:40] NVAPI GPU monitoring enabled.
[2017-11-08 07:18:40] 6 miner threads started, using 'lyra2z' algorithm.
[2017-11-08 07:18:40] Failed to get extranonce1
[2017-11-08 07:18:40] Stratum subscribe answer id is not correct!
[2017-11-08 07:18:40] JSON-RPC call failed: (unknown reason)
[2017-11-08 07:18:40] ...retry after 30 seconds
[2017-11-08 07:18:41] API open to the network in read-only mode on port 4068
[2017-11-08 07:19:10] Failed to get extranonce1
[2017-11-08 07:19:10] Stratum subscribe answer id is not correct!
[2017-11-08 07:19:10] JSON-RPC call failed: (unknown reason)
[2017-11-08 07:19:10] ...retry after 30 seconds

other rigs works well some random after quitting n restrting miner, it goes back to normal, some just don't & keeps on going on & on.

suprnova works fine.

Does it happening still? Zcoin had some error during hardfork block. It's resolved now.